Before

The exterior of the home had no radon mitigation system in place, with no visible piping along the siding.

After

A radon mitigation pipe was installed along the exterior of the home and vented above the roofline to allow proper airflow.

Before

The basement area had no radon mitigation system in place, with existing mechanical equipment and no piping installed.

After

A radon mitigation pipe was installed in the basement, routed through the space to connect to the exterior system.

Originally built with just one extraction point, this Burlington home needed an upgrade to better handle basement airflow and radon dispersion. After installing a second extraction point and optimizing interior pipe runs, radon levels are now better managed. Our before-and-after visuals capture this critical improvement, showing both added functionality and clean installation.

Prior to installation, the home was unoccupied and radon tested at 2.3 pCi/L—just slightly above the client’s personal target threshold of 2.0. The homeowner had recently purchased the property and made it clear that he would not move his pet in until the radon concern was addressed. There were no sump pumps, water guards, or crawl spaces, and the foundation was solid cement—making for a clean canvas for the system.

After installation, the radon mitigation system was professionally installed with a direct run that minimizes any airflow restriction. While not a high-level reading by EPA standards, the system was designed to achieve optimal sub-slab depressurization to bring the level well below 2.0. The "after" look showcases a polished setup, with no disruption to the structure and a clean, code-compliant exterior fan setup.

Before

The home has a high radon level of 28 pCi/L with an unfinished basement and no confirmed mitigation system in place.

After (Planned Work)

A radon mitigation system will be installed following on-site evaluation, with documentation of the installation process to support the final setup.