Radon Mitigation Before & After Photos

Click on a photo to enlarge.

Radon Fan Upgrade and System Service in Cheshire

Before

The home had an existing two-pipe radon mitigation system with a Festa Hawk fan. The radon level was measuring 5.0 pCi/L, slightly above the EPA's recommended action level of 4.0 pCi/L.

After

We upgraded the system by replacing the Festa Hawk fan with a Festa Eagle Extreme. The system sticker was updated with our company information, and a radon test kit was left with the homeowner. Follow-up testing will help confirm how the upgraded fan is performing.

One-Point Radon Mitigation System Installed in Southington

Before

Built in 2015, this Southington home tested at 7.0 pCi/L, above the EPA’s recommended action level of 4.0 pCi/L. The home has an unfinished basement with gravel beneath the foundation and no crawl space. An existing sump pump cover was in place but still needed sealing to help limit potential soil-gas entry.

After

A one-point radon mitigation system was installed with an RP145 fan. The extraction point is positioned near the sump pump, and the exterior piping exits along the left side of the home. Sealing the sump cover remains an important step in limiting potential soil-gas entry. Follow-up radon testing can help confirm the system’s effectiveness.

One-Point Radon Mitigation System Installed in North Haven

Before

The home tested at 8.9 pCi/L, above the EPA's recommended action level of 4.0 pCi/L. The existing sump pump was sealed, but the surrounding WaterGuard was discussed as an area to address to help reduce potential pathways for soil gas entry.

After

A one-point radon mitigation system was installed with a Festa Hawk fan. The extraction point was placed near the sump, and the exterior piping was routed out the back of the home. Sealing the WaterGuard remains an important consideration. Follow-up radon testing is recommended to confirm the system's performance.

Two-Pipe Radon Mitigation System Installed in Branford Home System Exit

Before

The exterior of the home had no radon mitigation system in place, with no visible piping along the siding.


After

A radon mitigation pipe was installed and routed out the right side of the home, vented above the roofline.

Two-Pipe Radon Mitigation System Installed in Branford Home Mechanical Room

Before

The mechanical room had no radon mitigation system in place, with limited space available for installation.


After

 

A two-pipe radon mitigation system was installed within the mechanical room, carefully routed to fit the tight space while maintaining proper airflow.

background