Radon Mitigation Before & After Photos
Click on a photo to enlarge.
One-Point Radon Mitigation System Installed in Winsted
Before
The home tested at 5.4 pCi/L, above the EPA’s recommended action level of 4.0 pCi/L. An open trench approximately two feet wide and 20 feet long was present in the basement, and the homeowner wanted to address radon before moving in.
After
A one-point radon mitigation system was installed with a Hawk fan and piping routed through the rear right side of the home. The system was designed to draw radon from beneath the foundation and vent it safely outdoors above the roofline. The open trench was identified for follow-up cement work by the homeowner’s father-in-law.
Radon Mitigation Plan for Large Home in Watertown (Foundation Wall / Secondary Area)
Before
The secondary basement area along the foundation wall had no radon system in place, with exposed concrete and no extraction point.
After
A radon mitigation pipe was installed along the foundation wall, routed to provide additional coverage and improve overall system performance.
Radon Mitigation Plan for Large Home in Watertown (Primary Basement Area)
Before
The main basement area had no radon mitigation system in place, with open floor space and no visible piping or suction points.
After
A radon mitigation pipe was installed in the main basement area, positioned to create an effective suction point while maintaining a clean and unobstructed layout.
Radon Mitigation System Installed in Watertown Condo Interior
Before
The small unfinished basement had no radon mitigation system in place, with no piping or suction point installed.
After
A radon mitigation pipe was installed in the basement, creating an effective suction point within the limited space.
Radon Mitigation System Installed in Watertown Condo Exterior
Before
The exterior of the condo had no radon mitigation system in place, with no visible piping along the building.
After
A radon mitigation pipe was installed on the exterior and routed to safely vent above the roofline.