Radon Mitigation Before & After Photos
Click on a photo to enlarge.
One-Pipe Radon Mitigation System Planned for Prospect Home
Before
The home tested at 6.9 pCi/L with no active radon mitigation system installed beneath the foundation.
After (Planned Work)
A one-pipe radon mitigation system is planned to improve airflow beneath the slab and reduce radon levels throughout the home.
Multi-System Radon Mitigation Installed for Condo Complex in Cheshire
Before
The condo complex had elevated radon levels of 33.3 pCi/L across multiple foundation areas, with no system in place to address the full scope of the property.
After
A multi-system radon mitigation setup was installed, covering all foundation areas with multiple extraction points and noise-reducing components to ensure effective and balanced performance.
Two-Pipe Radon Mitigation System Installed in Branford Home System Exit
Before
The exterior of the home had no radon mitigation system in place, with no visible piping along the siding.
After
A radon mitigation pipe was installed and routed out the right side of the home, vented above the roofline.
Two-Pipe Radon Mitigation System Installed in Branford Home Mechanical Room
Before
The mechanical room had no radon mitigation system in place, with limited space available for installation.
After
A two-pipe radon mitigation system was installed within the mechanical room, carefully routed to fit the tight space while maintaining proper airflow.
Radon Mitigation System Installed in Guilford Home Office Basement
Before
The home had a radon level of 6.9 pCi/L with no mitigation system in place. The basement was being used as a home office area, increasing the importance of improving indoor air quality.
After
A one-pipe radon mitigation system was installed near the boiler closet and routed through the drop ceiling to the exterior for effective radon reduction.
