Before:

• Dirt crawl space (12x5) exposed

• Small sump pump hole (4x2 inches) uncovered

• No encapsulation, radon level at 4.9 pCi/L

• Three unsealed foundations

After:

• Crawl space now encapsulated

• Sump pump hole sealed with cover

• All three foundations addressed

• Full system installed and exit point placed on left side of the home

Before: During the real estate transaction, it was identified that the home's basement system, part of an older mitigation setup, was unsealed, allowing radon levels to reach 7.1 pCi/L. After: After our intervention, where we sealed the basement system effectively, the home now maintains radon levels well below the EPA's action guidelines. This update not only ensures a safer environment but also aids in the smooth transition of property ownership.

Before our visit, the home had no existing mitigation and was registering high radon levels. After assessing the layout, we installed a two-pipe system with careful consideration for aesthetics and airflow. The laundry room and closet were selected for internal access points, minimizing disruption. Despite thick shrubbery on the exterior, the final install was tidy and efficient—leaving the home safer and ready for long-term occupancy.

Before: The home's complex basement configuration—with multiple foundation types, partially finished spaces, and limited routing options—made radon mitigation a unique challenge.
After: With two powerful systems expertly installed—one routed discreetly through the dumbwaiter closet near the furnace and another behind the chimney—we achieved a clean, efficient setup while maintaining the integrity of the living space.

Before

The home tested at approximately 6.0 pCi/L and did not have an active radon mitigation system in place to reduce radon levels.

---

After (Planned Work)

 

A radon mitigation system will be installed to actively reduce radon levels and help create a healthier indoor environment throughout the home.