Radon Mitigation Photo Album: Passive-to-Active Radon System Conversion in Orange
This Orange home’s passive radon system was upgraded after a CRM test returned 9.0 pCi/L. We extended the piping through the attic and installed a Festa Hawk fan to create active soil-gas ventilation. The exhaust was routed through the roof using a Kozy Collar suited to the roof installation. A follow-up radon test will help verify the system’s performance.
Attic Piping and Existing Passive System
The attic shows the existing passive radon piping running through the roof framing. The system was upgraded by extending the piping and adding a fan to actively vent soil gases outdoors.
Festa Hawk Fan Installed in the Attic
A Festa Hawk fan was installed in the attic as part of the passive-to-active conversion. The fan connects to the radon piping and provides the suction needed to draw soil gases from beneath the foundation.
Extended Radon Vent Pipe in the Attic
The vertical section of piping extends toward the roof penetration, connecting the system to the outdoor exhaust. A Kozy Collar was used at the roof to complete the penetration.
Attic Pipe Connections
The attic piping connects the existing system to the extended exhaust line. These connections allow the active system to draw soil gases through the piping and discharge them outdoors.
Home Exterior and Roofline
This exterior view shows the home and its roofline, where the radon exhaust piping was routed through the roof as part of the system upgrade.