Radon Mitigation Photo Album: One-Point Radon Mitigation System Planned for Taconic Home
The planned work includes a one-point radon mitigation system for a Taconic home with a measured radon level of 4.9 pCi/L. The extraction point will be installed in the unfinished basement, with exterior piping routed through the most suitable side of the home. Approximately 25 feet of floor cracks will also be sealed to help limit potential radon entry.
Exterior Radon Mitigation System - After
Completed exterior radon piping and fan routed alongside the chimney, with the vent extending above the roofline.
Radon Fan - RP145
Close-up of the RP145 radon fan installed as part of the mitigation system.
Interior Radon Piping Near Electrical Panel
Radon system piping installed along the basement wall near the electrical panel and existing utilities.
Home Exterior - Before
Exterior view near the chimney showing the area before the completed radon system installation.
Basement Foundation and Radon Piping
Radon mitigation piping routed along the basement foundation and beneath the floor framing.
